The butterfly valve is a manual type sanitary butterfly valve with butt-welded / butt- welded ends, which is widely used in process piping systems for isolation and control.

Specification

1. Reference No. : YBL-1MW-P

2. Sizes available: 1/2" to 12" (1/2", 3/4", 1”, 1 1/2", 2", 2 1/2", 3", 4", 5", 6", 8", 10", 12")

DN15 - DN300 (DN15, DN20, DN25, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300)

3. Material: Valve body and disc material can be AISI 304 or AISI 316L, 304L and 316 materials are available upon request.

4. Max. working pressure: 145psi (10bar) for DN25/1"-DN100/4"; 116psi (8bar) for DN125/5"-DN150/6"; 73psi (5bar) for DN200/8"-DN300/12".

5. Temperature range: 14 ~ 248°F (-10 ~ 120°C) with EPDM seat, -58 ~ 356°F (-50 ~ +180°C) with VMQ (Silicone) seat.

6. End connections: butt-welded / butt-welded.

7. Operation: 4-position Pull handle as the product photo shows

8 .Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm), Ra 32µin is the default.

Options

Valve body and disc material can be AISI 304 or AISI 316L, 304L and 316 materials are available upon request.
The seat and gasket can be EPDM, VMQ (Silicone) or Viton (FPM), all complying with FDA 21CFR177.2600.
End connection can be butt-welded, sanitary tri-clamp, threaded, flanged, I-line or others upon request.
Handles: 4-position pull handle; multi-position handle with plastic cover or in pure stainless steel.

Operation

Actuators to reach automatic operation: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), and electric actuator.

NC operated: normally closed (fail closed)---air to open, spring to close
NO operated: normally open (fail open)---air to close, spring to open
AA operated: double acting---air to open, air to close

Valve intelligent control: position sensor, C-top controller, C-top controller (AS-I)
Standards: DIN, 3A, SMS, ISO / IDF, BS / RJT, and ASME / BPE

Technical Parameters

Technical Parameters
Steel material	Product wetted steel parts	AISI 304 or 316L (1.4301 / 1.4404)	Provided with material inspection report
	Other steel parts	AISI 304
Seal material	Standard	EPDM	All seal materials comply with FDA 21CFR177.2600
	Options	VMQ / Viton (FPM)
Pressure	Working pressure	≤145psi (10bar)
	Supply pressure for air actuator	70 ~ 116psi (5 ~ 8bar)
Temperature	Working temperature	EPDM: 14 ~ 248°F (-10 ~ 120°C) VMQ (Silicone): -58 ~ 356°F (-50 ~ +180°C) Viton (FPM): -22 ~ 428°F (-30 ~ +220°C)
	Sterilization temperature	150°C (302°F), Max. 20 min
Surface treatment	Inside surface treatment	Ra 16 ~ 32µin (0.4 ~ 0.8µm)
	Outside surface treatment	Ra 32 ~ 64µin (0.8 ~ 1.6µm)
Connection	End connections: butt-welded, sanitary clamp, male and female threaded, flanged, I-line or others upon request.

Inquiry Cart 0