Stainless Steel 304 316L Tri Clamp Manual/ Pneumatic Sanitary Butterfly Valve Of Brewing Accessories
Butterfly valve, also called the flap valve is a kind of simple structure of the regulator, can be used for low pressure pipeline medium of switch control butterfly valve is closed (disc or disc) is a disk, around the axis of rotation to achieve the opening and closing a valve.
Valves can be used to control the flow of various types of fluids, such as air, water, steam, various corrosive media, mud, oil, liquid metal and radioactive media.The main cutting and throttling function in the pipeline.The butterfly valve opening is a disc shaped butterfly plate that revolves around its own axis in the valve body to achieve the purpose of opening and closing or regulating.
Product selection
1. The main control parameters of butterfly valve are size.
2, butterfly for single plate type wind valve, and its simple structure, convenient processing, low cost, simple operation, but the accuracy is poor, only apply to the ventilation and air conditioning system as a switch or coarse adjustment occasions.
3, can be manually, electric or pull chain operations, can be 90 ° of arbitrary Angle is fixed.
4. Due to the single-spindle single valve plate, the bearing capacity is limited, and the service life of the valve is short in the case of large pressure difference and large flow velocity.The valve has a closed and general type, insulation and non - insulation.
5. The electrodynamic butterfly valve has only two position control, and the electric actuator is the same as the multi-leaf valve.
| Product Name: | Sanitary Butterfly Valve |
| Material: | 304 or 316L |
| Standard: | 3A, SMS, DIN, RJT, IDF |
| Size: | 1/2-10 or DN15-DN200 |
| Connection Way: | Weld, Clamp, Male, Female, Flange, or Combinations |
| Operated: | Manual, Pneumatic, Electric |
| Manual Handle: | Pull Handle (2-4 Positions), Plastic Trigger Handle (13 Positions), Stainless Steel Trigger Handle (13 Positions) or Micro Handle (contact us) |
| Packing Details: | Usually bubble pack for each butterfly valve within carton box, Plywood case is also available depends on the quantity and the way of transport. |
Advances:
1. Easy to open and close, quick and easy to operate.
2. Simple structure, small size, short structure, small size and light weight, suitable for large diameter valves.
3. The mud can be transported, and the least liquid is stored in the pipe.
4. Good sealing can be achieved under low pressure.
5. Good regulation performance.
6. Fully open seat channel has a large circulation area and less fluid resistance.
7. The opening and closing moment is relatively small, since the butterfly plate on both sides of the rotating shaft is basically equal to the media, and the direction of the torque is opposite, so the opening and closing is less efficient.
8. The sealing surface material is generally made of rubber, plastic, so the low-pressure sealing performance is good.
9. Convenient installation.
10. The operation is flexible and labor-saving, and it can choose manual, electric, pneumatic and hydraulic methods.
