Sanitary SS304 2.0mm - 3.00 mm Material For Large Brewing Equipment With Pure 100% TIG Welding
1. Introduction
Technical Data:
1. Inner thickness:3.0mm, outer thickness: 2.0mm
2. Material: SUS 304/306/red copper
3. Polished inner: 0.4um
4. Four vessels brewhouse: mash +lauter + kettle +whirlpool,hot water tank, steam heating or gas fires directly ;
5. Double dimple cooling jacket (on main shell and cone). With separate inlets and outlets. Pressure tested.
6. Inner - cylinder body, 60° /70°cone bottom. Outer - Cone top, cylinder body & cone bottom.
7. Shadowless ellipse manhole. (on side wall)
8. Rotatingvacuum relief valve;
9. Sanitary triclamp fittings and triclamp butterfly valves
10. 4 inch Hop port
11. Thermometer
12. Insulation: PU 50mm -100mm or customized
| Brewhouse / Saccharify system (stainless steel or Luxury red copper) | Lauter tun |
| Mash kettle |
| Mash pump |
| Combined pipes |
| Frequency inverter |
| crusher |
| Heat exchanger |
| Oxygen adder |
| Fermenting tanks (stainless steel tanks) | Fermenting tank |
| Valve pipe |
| Cooling pipe |
| Thermal meter |
| Pressure meter |
| Cooling system | Cool water tank |
| evaporator |
| refrigerator |
| Ice water pump |
| Pipe & valve |
| Controlling system ( Digtial control cabinet and PLC) | Power controlling cabinet. |
| Meter controlling board |
| Refrigerator board |
| PLC control board for option |
| Washing system (brewery CIP system) | Washing tanks |
| Mobile pump |
| Valve & pipe |
| Beer sale section | Little wooden keg |
| Beer valve |
| Soft pipe |
2. Welding and polishing
Polishing:
Polishing is vital for tanks. Tanks should be polished wholly inside and outside.
Therefore it can ensure there is no place for the bacteria to hide in tanks.
Our polishing system consists of auto and semi-auto polishing machine and manual polishing.
Each tank is polished three times and more polish for the key place.
Welding:
Our argon central system for welding provides 100% pure argon to protect tanks from distorting during welding.
