15BBL Customizable Conical Beer Fermenter For Brewery Fermentation Tank
Fermentation tank are made by SUS304 stainless steel , which meet domestic and international food safety and hygiene standards, They are cylindrical cone bottom tank , the cone is 54-72 degree . Their externals are made by 2B stainless steel drawing board , connected by welding . Their internals have a protective film by picking passivation , and equipped with 80mm pulyurethane insulation , .The tanks with dimple plate on cone and side , they are cooled by glycol water or alcohol water . Single tank , single control .
Types: 100L-3000L , 1HL-300HL , 1BBL-300BBL
Other beer fermentation tank : Open FV , Single -wall FV
Control Method:Single tank, single control. Cooled by dimple plate jacket . Top quick-open type pressure manhole; can cast dried hops (Brewing IPA)
Interior Tank: Stainless Steel 304, Thickness 2.5 mm
Exterior Tank:Stainless Steel 304, Thickness 2.0 mm
Heating area 1.4 m2;
Head: Φ700 dished head, Thickness 3mm;
Lower-cone: Stainless Steel 304, Thickness 3mm; cone base 60 degree(optional 54 degree)
Insulation layer thickness: 80mm, Polyurethane insulation;
Welding method: argon protection welding, plate protects weld slinging light band;
Temperature measurement method: intelligent temperature with temperature probe, centralized display control;
Feeding method: feed from bottom, feed yeast from bottom;
Discharge method: the bottom has two pipes, the beer pipe is higher than the sewage pipe;
| | Function:Wort Fermentation and maturation |
| Interior Shell:SUS304 Stainless Steel full welded,TH: 3.0mm; |
| Exterior Shell:SUS304 Stainless Steel full welded,TH: 2.0mm; |
| Insulation: Polyurethane-TH:80mm |
| 100% TIG welding with pure argon gas shield |
| Overall polishing to 0.4~0.6μm without dead corner |
| Glycol Jacket: Dimpled plate on cone and side,thickness:2.5mm |
| Cooling media: glycol water or alcohol water. |
| Dry hopping port and safety valve on the top of tank |
| Mechanical relief valve,Shockproof pressure gauge on CIP arm |
| Stringent tank test with 3 BAR pressure(48Hours) |
| Stringent Jacket test with 3 BAR pressure(48Hours) |
| Rotating racking port,discharge port with butterfly valve |
| Dished head and 60 degree cone bottom |
| Inward type elliptical side manhole, with bevel edge |
| Sanitary top mounted pressure manway |
| CIP arm with 360° coverage rotatable CIP spraying ball |
| Thermowell with high accuracy temperature sensor: PT100 |
| Cooling control:Square table control,sigle tank single control. |
| Top ladder hanger, in line with manhole vertically |
| Welding seams brushed sand belt, welding points to be acid passivated, |
| 4 heavy duty stainless steel legs with leveling footpads |
Accessories : Edible Tube , Inflatable Joint , Refrigerant Pipeline (Glycol) ,Insulation Pipeline
Please Note: mechanical pressure pressure regulating valve(optional water-sealed), with positive and negative pressure breathing valve, with a rotary washer. Cone bottom with removable multi-functional combination interface. With some Leake sampling valve, other valve instruments, accessories supporting.
Fermentation tank achieves to auto-control temperature and pressure
