1000L SS316 Stainless Steel Tanks Beer Serving Tank Bright Tank With Mirror Polish
Beer distribution tanks are often also called serving tanks, tax determination tanks or clear beer tanks (=CBTs), bright beer tanks (=BBTs) or maturation/storage or conditioning tanks. These tanks are used for the storage of the beer prior to being served or packaged. Depending on their application the beer serving tanks can be glycol jacketed or can be located in a walk-in cooler. For brewpubs serving is often done by pumping or pressurizing the beer toward the serving location.
| Capacity | 100l-20000l |
| Model of brite tank | Double wall brite tank Single wall brite tank |
| Body of Tank | Dished head and conical bottom |
| Location of Manway | Top mounted manway |
| Work Pressure | 2-3 bars |
| Insulation | Yes/No |
| Glycol Jacket | Yes/No |
| Heavy Duty Leg | 4 pcs |
| Carbonation Device | Yes, 0.45 micron meters |
Top Quality Components
All product leading parts in stainless steel 304 and food grate;
Complete per-fabricated unit, grinded surface, well welded, prolong the service life of equipment;
Perfect design, top quality accessories, to minimize the equipment’s failure rate.
Specification
Effective capacity - 200L. Total capacity – 250L.
²Working pressure - 0.1MPa. Design pressure - 0.15Mpa
²Inner - Cone top, cylinder body, 60°cone bottom.
²3 legs.
²Top manhole with CIP tube and spray ball.
²1 Tri-clamp PVRV
²1 Tri-clamp sample cock
²1 hand-moved pressure gauge & 1 hand-moved thermometer
²1 racking arm on cone side
²1 drain on cone bottom
²3 butterfly valves
Material - Inner & outer clad S.S. 304.Tri-clamp sanitary pipelines and valves.
Design pressure 45 psi (3bar); working pressure 15psi (1bar)
4 stainless steel legs with leveling footpads
Interior shell: 304 stainless steel, thickness 3mm
Exterior shell: 304 stainless steel, thickness 2mm
Interior and exterior finish bright polish to 0.2~0.4 μm, hygiene surface
All Interior welds ground to a smooth0.2~0.4 μm sanitary finish
Flanged and dished head top and bottom
20% headspace unless a different volume is requested
Combined drain extensions and beer port are standard
Top manway or side manway door
Dual zone in sidewall and bottom dimple cooling jacket with glycol inlet and outlet
Polyurethane insulation thickness 80mm for cooling jacket on side and bottom
Non welding CIP arm and rotating 360 degree reach spray ball
Carbonation system with micron stone
Solenoid valve, pressure relief valve (safe valve) are standard.
Pressure gauge
Temperature sensor well
All clamps and gaskets to attach all accessories
Tank complete with piping, fittings, sanitary valves and all parts.
| Capacity | Cylinder(OD×H) | OAH | Inner Thickness |
| 7BBL | 1050×950mm | 1910mm | 3mm |
| 10BBL | 1100×1350mm | 2360mm | 3mm |
| 15BBL | 1300×1500mm | 2610mm | 3mm |
| 20BBL | 1350×1750mm | 2910mm | 3mm |
| 30BBL | 1500×2100mm | 3340mm | 3mm |
| 40BBL | 1700×2100mm | 3420mm | 3mm |
| 50BBL | 1750×2450mm | 3800mm | 3mm |
| 80BBL | 2100×2600mm | 4250mm | 3mm |
| 100BBL | 2200×2950mm | 4650mm | 3mm |
