50-5000L Clean and Polish Steel-True Color 2 Vessel Brewhouse Brewing Equipment
Beer Brewery Equipment
1) Automatic /semi-automatic operation system, only 1 or 2 brewers operate
2)Different capacity from 50L to 5000L per batch, meet your different requirements.
3) The Brewery system integrates advanced technology with the art-of-century beer brewing process & technique in Europe and U.S.A.
4)The whole set Beer Brewery equipment is made of sanitary stainless steel.
5)We offer a wide array of Beer Brewery Equipment that will accommodate any budget or production goal that each customer might have.
Brewing Equipment System Consisting
| 1. Milling System | Malt Milling |
| 2. Brewhouse System | Mash/Lauter Tun |
| boiling/whirlpool Tank |
| Yeast adding tank |
| Plate Heat Exchanger |
| Wort Pump |
| Accessories:1Brewhouse system pipeline; 2. Level meter 3. Working Platform; 4. Yeast adding tank; 5. Venturi Tube; 6. Beer hose; 7. Rake; 8. Sugar Measuring Cylinder |
| 3. Fermenting System | Fermentation Tank |
| accessories: 1.CIP Pipe; 2. Pressure Gage; 3. Solenoid Valve; |
| 4. Vacuum Valve; 5. Cooling Pipe; 6. Thermal Insulation Pipe; |
| 4. Cooling System | Ice Water Tank |
| Chiller unit |
| Ice Water Pump |
| Relative Pipes and Valves |
| 5. CIP System | Alkaline Tank |
| Sterilization Tank |
| Pump and Valve |
| 6. Controlling System | Mashing Control Panel |
| Fermenting Control Panel |
Brewery equipment manufacturing details:
Mirror Polishing
1. Inside Polishing: Overall polishing to 0.2-0.4μm without dead corner .
2. Outside Polishing: Mirror polishing, smooth enough and passivating treatment.
3. Purpose: The tank itself has high precision and small details of the tanks have to be observed by a telescope.
4. Function: To make tanks become tidy and smooth, beautiful and durable.
100% TIG Welding
1. All welding is TIG welding.
2. All welding is double side welding.
3. Purpose: The use of argon on the protection of metal welding material, So that welding can not be in contact with oxygen in the air, thus preventing the oxidation of welding consumables.
4. Function: Make tanks become durable and strong.
Plow knife/Raker knife
1. Equipped in Mash/Lauter tank, used for storing the wort, and mashing.
2. Stir evenly and fast, to make the wort generate a high concentration.
3.Its operation will be controlled by the motor and the reduciton gear.
4. Based on our brewery formula, filtration will cost 1 hour.
Plate bottom/Filter plate
1. Equipped in Mash/Lauter tank, Laser cutting T-wires, Plate gap: 0.8mm
2. This filter plate is made on a complete stainless by CNC lathe, it is strong, filter fast and leak no grist.
3. Function: Use for Separating wort and impurities.
| | 
|
