Customized Power Pressure Cylindrical Conical Conical Beer Fermenter Fermentation Tank
Customized Power Pressure Cylindrical Conical Fermentation Tank are also called CCT’s(Cylindrical conical tanks), FV’s(fermentation vessel), primary fermentor or unitanks as they are used both for fermenting and largering. Fementing is the process during which the yeast transforms the wort into beer. Lagerings takes place after fermenting and is the time given to the beer to stabilize and age after fermenting.
Customized Power Pressure Cylindrical Conical Fermentation Tank can be individually temperature controlled through glycol jackets and are mostly equipped with accessories such as over-pressure and under pressure valve(PVRV), CIP arm, sanitary sample calve, manway, etc, The design of fermenters is based on our vast beer knowledge and especial bottom and the fact that we combine fermentation and maturation in the same vessel is very important. When calculating your fermenting& lagering capacity and configuration, sufficient time for fermenting and lagering to produce quality beers must be taken into consideration.
Fermenter technical note
1. Customized Power Pressure Cylindrical Conical Fermentation Tank liner are of international standards of quality 304 stainless steel material,highpressure polyurethane foam insulation,
2.The application of international standardized fermented beer production technology, a wide range of temperature control application technology.
3.Customized Power Pressure Cylindrical Conical Fermentation Tank cooling jacket at the same time meet the needs of the country the world 's technical standards ,the provision of Maitreya panels, arched passages spinulosa Watt Jacket channel heat exchangers and other methods to meet different cooling media and the pressure of the heat exchange technology needs
4. Cooling way: Ice water belt or miller plate;
Cooling media: glycol water or alcohol water.
Material:Inner (SUS304)thickness: 3.0mm;
External-Jacket(SUS304) thickness: 2.0mm;
Top seal head, thickness: 3.0mm.
Insulation: Polyurethane-thickness: 80mm.
The inner surface polished to Ra0.4um.
Equipped with: Cone 60° resist compression design, Side manhole: 430*330mm.
With sampling valve, vent valve, safety valve, pressure gauge, solenoid valve and etc.
Fermentation tank pressure: Design pressure 0.3MPa; Working pressure 0.15Mpa.
Cleaning System: CIP washing unit: Comprehensive cleaning.
Foot bolt: Adjust the height of the equipment, easy to install
| Capacity | 500 gallon, 4000L, 5000L |
| Material | Stainless steel304 or Stainless steel 316 |
| Thickness of tank | inner tank thickness is 3mm, outside cladding thickness is 2mm |
| Insulation material | Polyurethane |
| Insulation thickness | 80-100mm, customized |
| Bottom design | conical bottom |
| Cone angle | 60-75 degree |
| Manhole | top manhole or side manhole |
| Top spray system | spray ball |
| Cooling jacket | dimple jacket |
| Testing pressure | 0.4Mpa |
| Inside Polish | ≤0.6μm |
| Outside polish | secondary smooth polishing |
